Search Log in / register
GB
Sample Cart
flh
FLH CONNECTOR 0.5mm Pitch ZIF Connector For FPC
  • Features
  • Specification
  • Downloads
  • Samples

Ultra thin with the mounting height of only 1.2mm (.047"), yet applicable to 0.3mm (.012") thick FPCs. In-line surface mount tails. The housing is made of heat resistant resin to allow reflow soldering. The connector is available in either the normal or reverse configurations.

 

 

 

 

 

  • Ultra thin design

The FLH connector is the ZIF type ultra thin connector, with the mounting height of only 1.2mm (.047"). Applicable to 0.3mm (.012") thick FPC's.

  • Heat resistant design suitable for surface mounting

The housing is made of heat resistant resin to allow reflow soldering.

  • In-line surface mounting

Has an in-line surface mount tails for easy inspection.

  • Two types of connectors

The connector is available in either the normal or reverse configurations. The FPC is positioned with it's mating surfaces facing upward for the normal configured connector, while the reverse configuration requires that the FPC be positioned with it's mating surfaces facing down. The engineer has greater freedom in designing his circuitry.

  • Embossed tape for automatic mounting

The FLH connector can be packaged in embossed tape for automatic mounting.

  • Specifications

UL Recognized E60389

CSA Certified LR20812

  • RoHS Compliant

01 - Connection Type: Printed Circuit Board Connectors
02 - Product Type: FFC/FPC Connectors
03 - Pitch / Style: 0.50mm
04 - Current rating: 0.5A AC,DC
05 - Voltage rating: 50V AC,DC
06 - Temperature range: -25 to +85 Degrees Celsius
07 - Available number of circuits: 4 to 40
11 - Feature: ZIF Type
13 - PCB Mount Style: Surface Mount Technology (SMT)

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us

Additional Information

This product series has some additional information related to it that you can download from the list below.

1) Catalogue Page 2) Handling Manual 3) 3D Model