Search Log in / register
Sample Cart
ZR CONNECTOR 1.5mm Pitch Disconnectable IDC
  • Features
  • Specification
  • Downloads
  • Tooling
  • Samples

The twin U-slots (IDC slots), the 3-point insulation grip, and the distortion resistant disconnectable construction ensure a reliable connection even during severe environmental conditions.






  • Compact

Only 5.5mm (.217") high and 3.5mm (.138") thick.

  • Twin U-slot insulation displacement section

The insulation displacement section connected to each wire consists of two tin-plated slots (twin U-slots), which ensures reliable connecton.

  • 3-point grip construction

The 3-point insulation grip feature and the strain relief ensure a grip on terminated wires and protection of the insulation displacement connection from possible damage.

  • Distortion resistant construction

The header is fully shrouded and thus protects the receptacle from damage that could be caused by mating the connectors at an angle or otherwise mismating the connectors.

  • Compatible with the ZH crimp style connector

The same shrouded header can be used for either the ZR IDC type connector or the ZH crimp style connector. This allows both types of connector to be used interchangeably without replacing the header.

  • RoHS Compliant

01 - Connection Type: Printed Circuit Board Connectors
02 - Product Type: Wire to Board Insulation Displacement Connectors
03 - Pitch / Style: 1.50mm
04 - Current rating: 0.7A AC,DC
05 - Voltage rating: 50V AC,DC
06 - Temperature range: -25 to +85 Degrees Celsius
07 - Available number of circuits: 2 to 13
13 - PCB Mount Style: Through-hole Technology (THT)

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us

Additional Information

This product series has some additional information related to it that you can download from the list below.

1) Catalogue Page 2) Handling Manual 3) 2D Drawing 4) 3D Model
Can't find a Tool?

If you're having trouble finding the right tool, please contact our sales team.

Contact Us
Applicators (For ID Connectors)

Please select a tool for more information.

Applicator for ZR connector series.  Use in conjunction with HPD-M2A Handpress
JST Standard (Semi Automatic) Applicator for ZR Connector Series.  Use in conjunction with AP-K2N Press
Applicator for the ZR connector series. Use in conjunction with HPD-M2A Handpress or AP-2D Pnuematic Press