Series:

BHT CONNECTOR

Description: 5.1mm Pitch Disconnectable Crimp Style (Wire to Board)
Enlarge Photo

Designed for connecting liquid crystal display backlight lamps to their starters.

Applicable to higher voltage (voltage rating: 1,500V) than the BH or BHS connectors.

Low profile. Only 2.8mm (.110") thick so that the mounting height will be 3.0mm (.118").

Housing is of 2-piece construction, to prevent the contact for the higher voltage side from being exposed.

 

 

  • High withstanding voltage

Conforming to IEC664-1 standards, the BHT connector is designed to have enough electrical creep distances at the high-voltage side. Thus, compared to the conventional power supply connector for liquid crystal display backlight lamps, high voltage is guaranteed.

  • Low profile

Only 2.8mm (.110") height.

  • Housing construction

Housing is of 2-piece construction, to prevent the contact for the higher voltage side from being exposed, while the lower voltage side is designed to be shorter for easy insertion of the contact even with thin wires.

  • Standards

UL Recognized E60389

CSA Certified LR20812

  • RoHS Compliant